Fog Fury Jett PRO

The ADJ Fog Fury Jett Pro is a high velocity vertical Fog Machine that mixes color into the fog from 28x 3W LEDs (6 Red, 7 Green, 6 Blue, 3 Amber & 6 UV LEDs). The Fog Fury Jett Pro produces a dry even blast of fog over 40 feet (12 meters) in the air. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance Italian pump system for optimum output. ADJ’s Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with short warm-up time between fog blasts. 

The Fog Fury Jett Pro may be use vertically or horizontally. The reservoir tank may be mounted in the front or rear of the unit so the machine may be pointed up or down. Control options included 3-pin and 5-pin DMX In/Out connections, ADJ’s WiFLY EXR wireless DMX on-board, plus the ADJ FFJWR wireless remote comes included in the box.

Features:

LED and vertical fog effect combination

Operates in multiple positions

On Board control or remote control

WiFLY EXR Wireless DMX (up to 2,500 ft. /760M line of sight)

ADJ’s Electronic Thermo Sensing (ETS) technology

Safety cable eye bolt

Technical Information:

Optical: 28x 3W LEDs (6 Red, 7 Green, 6 Blue, 3 Amber & 6 UV LEDs)

Output:

Output: 40,000 Cubic Feet/1.132m3 Per minute 

Heater: 1450 Watts

Heat Up Time: 9 min

Fluid Type: Water Based Fog Fluid

Fluid Consumption: 150ml/min

On board control or Wireless DMX

Connections:

Data: 3-pin & 5-pin DMX In/Out

Control:

DMX Channels: 1, 2, 3, 7 or 9 DMX channels

WiFLY EXR Wireless DMX

Remote Control Included: FFJWR

On Board Control: Yes

Electrical:

AC 120V/60Hz or 240/50Hz (non switching) 

Physical:

Vedelikupaagi mahutavus (paak eemaldatav): 2.5 liitrit

Mõõdud: 419 x 315 x 206mm

Kaal: 9.5 kg